Conbextra GP 2

Conbextra GP2 is used for precision grouting where it is essential to withstand static and dynamic loads. Typical applications would be the grouting of base plates of turbines, compressors, boiler feed pumps etc.

Conbextra Tie Rod Grout

Thixotropic, cementitious gun grade, non shrink grout. Conbextra Tie Rod Grout is typically meant for applications of fi lling tie-rod holes, core cut holes in concrete.

Conbextra EP 10

Provides a free fl owing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications.

Conbextra EP 10M

Conbextra EP10(M) is a two part epoxy resin system for grout ing gaps ranging from 0.25mm to 10mm. It is an all liquid system consisting of a base and hardener.

Conbextra EP 75

Provides a free fl owing grout, for use where physical properties and chemical resistance of the hardened grout are of utmost importance. It is suitable for a wide range of heavy duty applications including Baseplate grouting to machinery foundation.

Nitofil PU 1F

Stops the fl ow of water when injected into cracks in concrete in the presence of dripping water. Nitofi ll PU 1F provides an eff ective system for crack sealing in wet conditions.

SikaGrout 214 IN

SikaGrout®-214 IN is a cement based 1-component, non-shrink, ready to use, pourable and flowable, two stage expanding engineering grout in dry powder form. It is widely used for precision grout ing in engineering objects subjected to static and dy namic loads.

Sikadur 42 HES IN

Sikadur®-42 HES (IN) is a three-component, high performance, high precision, low exothermic, pourable, and solvent-free, epoxy grouting system.

Sikadur 55 LP IN

Sikadur®-52 LP (IN) is two part, low viscosity, moisture insensitive injection-liquid, based on high strength epoxy resin. As an injection resin with good adhesion to dry concrete, mortar, stone, steel and wood. It is used to fill and seal voids and cracks in structures such as bridges and other civil engineering buildings, industrial and residential buildings.

Sika Injection 101 IN

Sika® Injection-101 IN is a low viscous, fast foaming, two component polyurethane hydrophobic resin, which reacts with water to produce a flexible foam. It is suitable for stopping water leaks and waterproof ing of cracks and joints in concrete.

Lokfix P

Lokfix are used for high strength corrosion resistant anchoring of bolts and bars from 12 - 51mm diameter into concrete, rock, masonry or brickwork where high speed of installation and early application of load is required.

PidiGrout 10M

Pidigrout 10M is a high-strength, non-shrink, cementitious grout designed for heavy-duty anchoring, machine foundations, and structural repairs.